Features…
- The Model 135 center fill assembly’s 13.5” wide spout
is an excellent upgrade for Harvestore® structures with older,
narrower spouts.
-
Self-Centering: No drop tube is needed.
-
Clean: Fallout and potential for losing feed are reduced.
-
Symmetric Filling: Promotes smoother unloader operation.
-
Low Maintenance: Long lasting engineered design.
-
Engineered curvature reduces the amount of lost material, especially
unseen leaf loss, which is often blown away when filling.
- Get a faster fill at harvest time — when every second counts.
Why
Model 135 Center Fill…
Exclusive
Hot-Dipped Galvanized Coating
Only the center fill manufactured by Engineered Storage Products
is hot-dipped galvanized. Others are pre-galvanized, a less thorough
method. The hot-dipped process increases resistance to corrosion.
13.5"
Wide Spout
The 13.5" spout matches or exceeds the capacity of most high
capacity blowers. Chances of plugging are reduced. If plugging should
occur, covers are easily removed for cleaning.
Rugged
Support Hardware
All mounting supports and angles for the Model 135 Center Fill are
hot-dipped galvanized and designed to resist high winds.
Engineered
Curvature
The curvature is engineered to match a specific Harvestore structure
diameter. The proper curvature reduces blower air turbulence, which
causes wind losses and material fallout at the top of your structure.
Remember: A specific diameter requires a specifically engineered
curvature.
Centering
Chute
You can accurately direct material to the center of the structure.
This process eliminates the need for a drop tube to control material
centering. The centering chute can be pre-adjusted at time of installation
for consistency.
Made
by Engineered Storage Products
The Model 135 Center Fill is specifically designed for Engineered
Storage Products brand structures and tooled to precisely engineered
standards. The Model 135 is the only center fill approved by Engineered
Storage Products Company.
|
